Stafer V6 – Mechanical Motor (45mm dia. Series) 10NM/15rpm

$190.00

The Stafer V6 mechanical motor is suitable for all types of roller shutters and awnings. The V6 mechanical motors range from 10NM ,20NM AND 50NM torque capacity with operating speeds of either 12rpm or 15rpm.

Stafer V6 motors can be operated via various mechanical switches or can easily be converted to a remote controlled motor with the addition of a Stafer External Receiver.

Up/Down Limit Adjustment

The upper and lower stopping positions are adjusted manually using the two recessed limit adjustment screws located on the motor head (yellow and white). Full setup instructions are supplied with the motor for easy installation and configuration.

- +

Just a few details! Tell us your measurements, how you want it to operate, and a bit about the location, and we’ll send you a free quote!

Specifications

  • Power Supply – 230V / 50Hz
  • Torque Rating – 10Nm
  • Operating Speed – 15RPM
  • Designed for switch-controlled operation
  • Manual limit adjustment via adjustment wheels
  • Includes 1.5m power cable
  • Maximum Lifting Capacity – 16kg
  • Protection Rating – IP44
  • Current Draw – 0.75A

Safety Information

  • Keep remote controls and switches out of reach of children.
  • The motor is not waterproof and should not be exposed directly to water.
  • Any externally installed motor must be protected with suitable covering.
  • Motors must be installed horizontally only.
  • Designed for intermittent operation; internal thermal protection automatically cuts power if overheating occurs.
  • Avoid dropping or striking the motor, as internal components may be damaged.
  • Parallel wiring or dual switching setups are not permitted for standard switch-operated motors.
  • Do not drill into the motor housing, as this can permanently damage the unit.
  • Incorrect installation or misuse may void warranty and create electrical or mechanical risks.

Ordering Information

  • Please specify the required drive wheel type when ordering (Round or Octagonal).
  • All electrical wiring and installation work must be completed by a qualified technician.


Features

  • Multi-purpose tubular motor suitable for roller shutters, awnings and sun protection systems
  • Can be installed on either left or right-hand side applications
  • Compatible with systems that do not require fixed stoppers
  • Built-in thermal overload protection helps prevent overheating damage
  • Supplied with an adjustable limit setting tool for easier access during installation
  • Simple and accurate end-limit adjustment without specialised equipment
  • Compact motor design allows shutter curtain to wrap closely around the motor head, making it suitable for tighter installations

google-review